产品中心/ products

您的位置:首页  -  产品中心  -    -  质控模体  -  QRM Micro-CT剂量体模

QRM Micro-CT剂量体模

  • 产品型号:
  • 更新时间:2024-08-08

简要描述:QRM Micro-CT剂量体模,QRM-MicroCT-Dose模体可使用标准铅笔形电离室进行剂量测量(DLP、CTDI)。

产品详情
品牌其他品牌产地进口
产品新旧全新直径:32 毫米
长度:120 毫米 重量:105 克
基材:软组织等效塑料中心钻孔直径:9 mm(可根据要求提供其他孔径)

QRM Micro-CT剂量体模,QRM-MicroCT-Dose模体可使用标准铅笔形电离室进行剂量测量(DLP、CTDI)。

用于 Micro-CT 系统上的剂量测量(DLP、CTDI)

软组织等效塑料

标准铅笔形电离室的中心孔

可定制

Micro-CT 剂量体模是一种长度为 120 毫米的剂量测量体模,用于确定剂量长度乘积 (DLP) 和计算机断层扫描剂量指数 (CTDI)。

可以将 100 mm 长的标准铅笔形电离室插入中心钻孔。可拆卸插件通常用于标准剂量测定体模,其中电离室可以插入到体模中心和距离体模外围 10 毫米处。

标准体模从人类躯干的平均直径(32 厘米)缩小到肥胖小鼠的直径(32 毫米)。

可根据要求生产不同尺寸和插入物质

QRM Micro-CT剂量体模

QRM Micro-CT剂量体模,QRM-MicroCT-Dose模体参数:

基材: 软组织等效塑料
中心钻孔直径: 9 mm(可根据要求提供其他孔径)
鼠标尺寸模型的尺寸:
直径: 32 毫米
长度: 120 毫米
重量: 105 克

The Micro-CT Dose Phantom is

designed to measure dose (DLP,

CTDI) using a standard penzil shaped

ionization chamber, usually  

availabel at a length of 100 mm.

MicroCT-Dose is a dosimetry phantom with a length of 120 mm for determination of DLP (Dose Length Product) and CTDI (Computed Tomography Dose Index). The central bore hole fits a standard pencil ionization chamber of 100 mm length.
The removable insert is commonly used in standard dosimetry phantoms where ionization chambers can be inserted at the center and at 10 mm from the periphery of the phantom.
The standard Micro-CT phantoms are scaled down from the diameter of an average human trunk (32 cm) to that of a fat mouse or lean rat (32 mm). Dimensions other than specified here can be produced upon request.


在线咨询

留言框

  • 产品:

  • 您的单位:

  • 您的姓名:

  • 联系电话:

  • 常用邮箱:

  • 省份:

  • 详细地址:

  • 补充说明:

  • 验证码:

    请输入计算结果(填写阿拉伯数字),如:三加四=7
公司简介  >  在线留言  >  联系我们  >  
产品中心
质控模体

CONTACT

办公地址:深圳市龙岗区南湾街道沙平北路111号吉茂大厦608A

TEL:0755-28896837

EMAIL:szchina1718@163.com
扫码加微信
版权所有©2025 深圳为尔康科技有限公司 All Rights Reserved   备案号:粤ICP备17126621号   sitemap.xml 技术支持:制药网   管理登陆

TEL:13632925349

扫码加微信